The Kids Bike Wheel Hoop Adapters for Hollywood Racks Sport Rider Bike Rack # HRSW-ADP-2 comes with 2 wheel hoop adapters. This will allow you to carry 1 kid's bike with 16 inch or 18 inch wheels on the Sport Rider, Sport Rider SE, or Sport Rider SE2 bike carrier.
If you want to carry 2 kids bikes, you will want 2 pairs of the # HRSW-ADP-2. view full answer...
Yes, when opening the box on your new Reese Explore 4 Bike Rack # 63124 you will have everything you need to assemble and carry your bikes to wherever you want to ride. If you're hauling any kids bikes, you will need an adapter bar if the frame leaves little space for you to hang the bike. Here is an adapter bar if you think you'll have that issue. Bike Adapter Bar Part # 64005. Some kids bikes are too small for that adapter bar and need the Yakima Tube Top Bike Adapter Bar # Y02531. view full answer...
The Yakima KingJoe Bike Trunk Mounted Rack includes 2 glass hatch hooks for glass trunk or gate mounts. An additional set of glass hooks, part # Y02612, is required for your RDX.
This bike carrier has a weight capacity of 60 lbs for 2 bikes, and weighs just 16.2 lbs.
When carrying bikes with alternative frames like kids bikes or women's bikes I recommend using an adapter bar like part # 64005. This attaches between the seat post and the handlebar stem and allows the bike to be carried... view full answer...
Per your first question, yes, we ship all our hitches with all the necessary installation hardware. These hardware packages will include nuts, bolts, spacer blocks, and bolt leaders. Some of our hitches will have a hardware picture if you mouse over the picture alternates so you can see what to expect.
A hitch for any given vehicle is going to be pretty similar from manufacturer to manufacturer. They want to make a strong, but easy to install hitch so they usually end up designing similar... view full answer...
The Hitch-It 2 Bike Rack for Straight Tongue Trailers # LC731138 comes just as pictured with the arms that hold the two bikes and the trailer tongue adapter to attach the arms to the trailer tongue. view full answer...
Yes, the Thule Chariot Cheetah XT Bike Trailer, Stroller, and Jogger # TH10100426-143 includes all the parts necessary to make it a bike trailer, jogger, or regular stroller. You would not need anything else. view full answer...
Yes, the Thule Chariot Cross Bike Trailer, Stroller, and Jogger # TH10202014-302 comes with the standard equipment for biking as well as the adapter kit to change it over to a jogging stroller.
I am attaching a link to some accessories we carry for these Thule trailer/jogger/strollers for you to check out as well. view full answer...
The Draw-Tite Class III Max-Frame Trailer Hitch, item # 75586, does not come with a pin or bolt to attach accessories to the hitch. These parts are sold separately.
Attaching a bike rack with a built in anti-Rattle Device that requires a threaded hitch pin will require a hitch pin from the bike rack manufacturer. If your bike rack has a hollow receiver you can use the Softride Anti-Rattle Device and Lock for 2 inch Trailer Hitches, item # SR25219 to install a threaded anti-rattle device... view full answer...
The Swagman XC 2-Bike Rack for 1-1/4" and 2" Trailer Hitches # S64650 is a great platform bike option for your 2003 Subaru Forester, so long as it is already equipped with a trailer hitch receiver, like the Draw-Tite Trailer Hitch Receiver # 36311, designed to fit the frame of your Forester.
To use the bike rack, you do not need any extra parts. Everything you need to install it on a trailer hitch is included with part # S64650.
The only time you'll need to use a ball mount, is for trailer... view full answer...
Yes, there is a pin included with the Thule Bike Trailer Conversion Kit # TH20100506 . After the hitch cup is mounted on your bike, the ball at the end of the hitch arm slides inside the hitch cup and is then secured to it with the pin and safety strap.
If you click on the video link below, you can see it in use around the 2:20 mark. view full answer...
The Swagman XTC4 4-Bike Rack # S64665 does include a hitch lock. The hitch pin is threaded as well to serve as an anti-rattle device, which will minimize movement of the bike rack in the trailer hitch receiver. The threaded hitch pin locks to the trailer hitch. A braided steel cable is also included to help secure the bikes to the rack.
The XTC4 # S64665 is designed to only fit a 2 inch trailer hitch receiver. No adapter is needed because the bike rack shank is designed to fit a 2 inch... view full answer...
A drawbar, also known as a ball mount or stinger, is the part that fits into the hitch and provides a platform for a ball that the trailer will couple to. If you are looking at the Curt trailer hitch for a 2015 Honda Civic then you can use # C11391. The drawbar isn't included but you can add one using part # C45521. If you will be towing with the hitch then the ball size used needs to match what the trailer coupler requires. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258.
You... view full answer...
The Jack-It 2 Bike Rack for A-Frame Trailers # LC429756 we carry only comes with the angled stinger, but you can pick up the straight stinger separately as part # LC67HD on our site. This then allows you to have the bikes offset or directly above your trailer A-Frame jack depending on your application. view full answer...
Technically this is a trailer package that is built using existing Yakima components, but all in one part number. Unfortunately we haven't had a chance to get a photo of this particular setup as it's a newly offered product.
The Yakima Kayak Trailer for 2 Kayaks and 2 Bikes # Y34TR uses the Yakima Rack and Roll Trailer with 66" Crossbars # Y08106. The trailer then has a Yakima JayLow Kayak Carrier w/ Tie-Downs - J-Style or Post Style - Folding - 1 or 2 Kayaks # Y04073 added, along with... view full answer...
Yes, the Yakima FullSwing 4Bike Rack, # Y02465, does include a lock that will secure the rack to your vehicle's trailer hitch.
The lock on the Yakima FullSwing is integrated in to the orange anti-rattle knob that is located at the bottom of the rack. When you install the bike rack into your trailer hitch, you will turn the anti-rattle device knob until the rack is secured in the hitch. The Yakima FullSwing will include a set of keys that will fit the lock in the knob. Once you use the... view full answer...
The Kuat Beta Folding 2 Bike Lightweight Aluminum Rack for 2 inch Trailer Hitches, item # B202-2, does not come with a locking hitch pin. We have a good selection (see link) of 2 inch hitch locks available.
A hitch lock is recommended with this bike rack. Our Stainless Steel Flush Design Trailer Hitch Receiver Lock, item # e98882, would be a good choice for this hitch. view full answer...
The 2-Child Thule Coaster XT Bike Trailer and Stroller # TH10101803 does come ready to attach to a bike. It uses what is called an ezHitch system to allow the stroller to be "towed" by your bike.
To go along with this stroller I do recommend the Transparent Rain Cover # TH20110700 just in case you get caught in wet conditions.
I've added links to video reviews for you to check out as well. view full answer...
The wiring for a 2015 Buick Encore is # C56216 and won't be an included item with the Curt Class-I trailer hitch # C11527. The reason wiring harnesses do not come with the hitch is because some vehicles already have a trailer wiring harness so we make them available separately.
The hitch # C11527 comes with a complete hardware kit and instructions.
If you happen to need a ball mount and hitch ball, I recommend ball mount # C45520 and 2 inch hitch ball # C40018 or a 1-7/8 inch ball # C40001.... view full answer...
The Rhino-Rack 2 Bike Rack # RRRBC045 doesn't come with bike or rack locks and since the only way to accomplish this is by wrapping a cable lock like part # e98891 around the bikes, rack, and trailer hitch I recommend checking out a different bike rack instead.
For a cost-effective bike rack alternative you can use the Swagman Trailhead # S63360 which can be locked to the vehicle with part # S64029. You will still need a cable lock like part # e98891 to lock the bikes though.
For a 2-bike... view full answer...
Go To Results